NTM – Automated Side Loaders
The unique pendulum principle of the compactor gives an excellent compaction ratio and also contributes to low life cycle costs as it has very few moving parts.
The Automated Side loader bodies can be lifted to both 2-axle and 3-axle chassis with body from 14 to 24 cubic metres.
NTM – Multi Chamber Quatro
NTM’s 2-story, 4-chamber refuse collector has asymmetrical division. The size of the chambers have been tailored to suit the normal refuse
volumes to ensure the longest possible collection round. The space-efficient pendulum packer is suited to Nordic winters.
The patented bin lift facilitates the lifting of four different types of waste in one lift. An emptying cycle begins with one work stage at the press of a button and is no different from emptying in a one or 2-chamber vehicle.
NTM – Multi Chamber OM-2K
Compression is managed by the automatic pendulum compactor. This method uses very few movable parts, thus further lowering the model’s service costs. In addition, the pendulum is high performance and leakage-free. The OM-2K is emptied through two completely independent manoeuvrable rear hatches.
The bin lift is operated from the cab using a joystick. Bins of up to 660 litres can be emptied. The OM-2K is a good long-term investment if you need a 2-chamber side loader.
NTM – Electric Hybrid
The batteries charge from an electrical connection at the workshop. The truck chassis recharges the battery from the braking energy when the vehicle is mooving, wich allows to choose batteries with lower capacity. RCV´s body works from batteries and it is also possible to run the unit from chassis PTO.
|Reduced CO2 emission|
|Reduced noise levels|
|Can be combined with all NTM rear loaders!|
|The batteries can be recharged from braking energy or direct from diesel motor|
MINI is powered by a mechanism on the spreader’s wheels. The spreading material is taken from the hopper using a roller with thrust plates, while the control of quantity of the used spreading material is performed by a mechanical lever for dosing.
When the JUNIOR spreader is mounted on light road patrol vehicles, it becomes an indispensable tool for removing ice and frost from bridges and overpasses on roads of high importance.
Powered by its own wheels and loaded directly from the tipper box of the vehicle on which it is attached, it has a spreading range limited only by the tipper capacity.
Henke’s moldboards with chain style level lift (or optional sliding level lift) keeps the plow level while our integral snow shield prevents snow from blowing over the top of the moldboard. > Henke’s Grade 50 Steel is 39% stronger than A-36 Steel.
Henke’s Road Safe pushframe provides maximum strength and prevents bottom angle bending. Cylinders are located above the pushframe for protection against road debris and ease of maintenance.
The MV4.1 is a compact high-end compact articulated tool tractor designed for the demanding municipal market. It uses both a PTO system and a high-speed hydraulic system to feed various equipment such as: sidewalk blade, snow blower, abrasive spreader, trimmer, mower, broom brush and more.
With the choice of a 74Hp or 115Hp engine, the MacLean is built to meet your needs. This multitude of options makes it possible to design a tractor that is perfectly suited to the task you need to accomplish and according to your budget. Offered with one or two high-speed hydraulic pumps, the differential dam or a two or three-speed shift-on-fly transmission is only part of the possibilities offered by the MacLean MV4.1.
Proudly made in Canada by a company that has more than 40 years of experience in manufacturing mining equipment, Maclean tractors are the reference when it comes to selecting the right municipal vehicle
Novilco – Fusion Hot Air Blowing System
No other system does all three things. If you heat with a torch, you’re probably burning the surface, and you’re not cleaning. If you’re blowing with a compressor, you’re not drying nor heating the surface.